WolfVision VZ-8plus Bedienungsanleitung PDF herunterladen (Seite 9)

Visualizer Menu, Camera control

Page Dec.

Code

Hex.

Code

Command Description see

Notes

0 218 $DA Unlock Visualizer-

This command unlocks the Visualizer-menu. After

sending this command the menu can be entered

by sending 206.

0 206 $CE Visualizer-Menu

on/off

This command enters the Visualizer menu (can

be unlocked with 218!) which is then displayed on

the screen. If the Menu is locked, then send this

code 1 sec. with 10 Hz (repetitively). By sending

this command again, the menu disappears and is

locked again.

0 139 $8B Unlock Extra-

Menu (Baud rate)

This command unlocks the Visualizer-extra-

menu. After sending this command the menu can

be entered by sending 206.

0 208 $D0 Function Up Moves the menu-cursor up (if the menu is

activated).

0 209 $D1 Function Down Moves the menu-cursor down (if the menu is

activated).

0 210 $D2 Data Right /

White Balance

Changes the data of the current menu-item if the

menu is activated. If the menu is not activated, a

white-balance is performed.

0 151 $97 White Balance By sending this command the camera performs a

white balance. (Also works, when the menu is

on.)

0 211 $D3 Data Left /

Text Enhancer

On/Off

Changes the data of the current menu-item if the

menu is activated. If the menu is not activated,

the Text Enhancer is toggled (switched on or off).

0 150 $96 Text Enhancer

On/Off

By sending this command the Visualizer switches

the Text Enhancement on. If the Text

Enhancement is already on, it is switched off.

(Also works, when the menu is on.)

1 158 $9E Text Enhancer On This command switches the Text Enhancement

mode On.

1 159 $9F Text Enhancer Off This command switches the Text Enhancement

mode Off.

1 160 $A0 Get Text

Enhancer

This function returns ‘1’+LF+CR if the Text

Enhancement mode is active and ‘0’+LF+CR if

the Text Enhancement mode is inactive.

0 214 $D6 Help This command gives a description off the settings

in the Visualizer-menu.

0 220 $DC Data Left + Data

Right

This command behaves like if you press Data

Right and Left together, i.e. the menu-item is

preset to the default value.

0 246 $F6 Reset Menu This command resets all Visualizer-menu-settings

except CS/ HD/VD and Sync-on-Green to their

default-settings.

T-01-04.RS232 Protocol VZ-8_plus_light.doc Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

WolfVision VZ-8plus Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Dokumentenkameras WolfVision VZ-8plus